PY Manual
Copyright © 2006 SANYO DENKI
AMERICA
, Inc.
70
1)
Click the TEST MODE button on the Main Menu screen.
2)
Click the JOG OPERATION button on the Test Mode Screen.
3)
You will be prompted whether or not an OFV (deviation) alarm should occur when
jogging operations are completed. Select "yes" if you want an alarm generated (note
that the amplifier is switched to velocity mode to accomplish the jogging operation).
Otherwise select "no".
4)
Once the Drive is ready, a prompt will appear for entry of a speed. Units are the
speed are revolutions per minute. Keep in mind that this is revolutions of the motor
shaft before entry to gearboxes, etc.
5)
After entry of a speed, a new prompt will appear with CCW (Counter-Clockwise)
and CW (Clockwise) buttons.
6)
Press and hold the left mouse button on the desired direction button. Releasing the
mouse will make the motor decelerate to a stop position.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
