①
②
③
④
⑤ ⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑦ ⑧
①
Main display
②
Sub display
③
Analog bar graph
④
Relative mode indicator
⑤
Auto range mode indicator
⑥
Data hold indicator
⑦
DC measurement indicator
⑧
AC measurement indicator
⑨
Polar charactor
⑩
Continuity check indicator
⑪
Low battery voltage indicator
⑫
Unit of readings for main display
⑬
Unit of readings for sub display
―
8
―
―
7
―
3-2 Display
[ 4] DESCRIPTION OF FUNCTIONS
4-1 Power Switch/Function Selector
Turn the switch to turn on/off the power and select a measuring
function. All segments of the LCD display will be turned on for 1
seconds after power-on, and then the meter will be ready to use.
Note:
The push buttons between the display and the function selector
work differently depending on how long you press. In this
manual, "press" means pressing momentary and "press and
hold for 1 sec. or more" means pressing longer.
4-2 Auto Power Saving
The Auto Power Saving mode turns the meter off automatically
after approximately 30 minutes of no activities. While the Auto
Power Saving mode, following activities set the auto power saving
back.
1) Function selector or push button operations
2) Non-OL readings in the
Ω
function, diode test, or continuity
check, non-zero readings in the Duty cycle/Frequency
measurement functions, or significant measuring readings of
above 512 counts in the other function ranges
While data communication to your PC is in use, Auto Power
Saving mode will be temporarily cancelled.
4-2-1 How to get back from the Auto Power Saving
Press the SELECT, RANGE HOLD,
△
REL
、
or HOLD button, or
disconnect the object to measure and turn the power switch off and then
back on, and select a function before connecting the object.
