Sanwa MT-5, User Manual

Page: 67 / 78

56
How to Use Each Feature
ENTER BACK
ENTER BACK
ENTER BACK
BATTERY
BUZZER
1) Select [SYSTEM] with the multi-selector and determine with
the Enter operation.
2) Select [BATTERY] with the multi-selector and determine with
the Enter operation.
3) Setting TYPE
Set TYPE for the battery to be used with the multi-selector.
○
Setting Range: DRYx3 (AAA x3)
Ni-MHx3 (Nickel Hydride)
Li-Pox1 (Lithium Polymer)
CUSTOM: ALERT VOLT:2.5 ~ 5.0v
LIMIT VOLT:2.7 ~ 5.0v
○ Default: DRYx3 (AAA x3)
*MT-5 do not have automatic power off system. Please make
sure turning off when finishing to use the transmitter.
● You can change the voltage setting of the battery alarm of the transmitter.
● By selecting Type [DRYx3 (Batteries)/Ni-MHx3 (Nickel Hydride)/Li-Pox1 (Lithium Polymer),CUSTOM], you
can set the alarm easily.
*When selecting CUSTOM with the Type, you can set ALERT VOLT that sets voltage to make Alarm go off
and LIMIT VOLT of the lower voltage.
● TH SLOW (Throttle Slow) is a feature to limit (50%) the operating quantity of the throttle’s high side when
the battery voltage of the transmitter becomes LIMIT VOLT (Fail-Safe feature).
● You can set operating sounds of key operation, Trim and Switch and the buzzer scales.
● For key operation only, you can set the first and last half of the operation sound.
● You can set 5 steps of the volume and 7 types of scales.
1) Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2) Select [BUZZER] with the multi-selector and determine
with the Enter operation.
3) Setting Tone and Volume
You can switch between Tone (scales) and Volume
(Sound Volume) with Select button operation. Select an
item to change setting to adjust.
○ Setting Range: KEY-CLICK
TLM1-ALERT
TLM2-ALERT
VOLT-ALERT
TIMER
INTERVAL
LAP-NAVI
*You can set the first and last half of the operation sound
for KEY CLICK tone (scales).
○ Setting Range: TONE 1~7
VOLUME OFF ~ 5
○
Default: VOLUME 4
TONE 1 [KEY CLICK 2 → 1]