Sanwa MT-5, User Manual

Page: 59 / 78

48
How to Use Each Feature
● About copying from a micro SD card
When performing Model Copy, the main body memory and
a micro SD card can select designation of the copy source
and the copy destination. When selecting a Model on the
copy destination selection screen, you can select with the
Select button operation.
1) When a model is selected, designation of the copy source
and the copy destination other than the main body memory
can also be selected.It is switched by the operation of the
select button.
・
MEMORY (Main Body Memory): 20 memory
・
SD CARD (Micro SD Card): 250 memory
・
SD EXP. (Micro SD EXP.): 20 memory
*SD EXP. copies data like the template data. Download the
template data from our HP to use.
Enter Operation
Memory
SD CARD
SD EXP.
● A feature to clear (initialize) the setting data of Models.
1) Select [MODEL] with the multi-selector and determine with
the Enter operation.
2) Setting Model Clear [MODEL CLEAR]
Select [MODEL CLEAR] with the multi-selector and
determine with the Enter operation.
3) Select Model Data to perform Model Clear.
You can also select the main body memory and Model Data
in the micro SD card by operating the Select button.
4) When Enter is being operated, a message is displayed
on the screen. Follow the display to operate and complete
Model Clear.
● About the Model Clear Mode
・ FULL
All settings in the Model Data will be cleared.
・ SYSTEM
Select in the contents of SYSTEM of Model Data and
clearing
・ MODEL
Setting within Model Data, TH Function
Clearing only the setting value of AUX
Select for your usage.
ENTER BACK
ENTER BACK
<1>Confirmation Screen
・ NO → Return to MODEL screen
・ YES → Start clearing → Go to 2
<2>Clearing in progress
After Rotation Reduction
is displayed Return to
<MODEL> screen
MODEL CLEAR