23
How to Use Each Feature
How to Use Each Feature
●
You can change the steering feature from Mild to Linear and to Quick.
In general, if you find your RC car oversteering, change the setting to the minus side and if you find
understeering, change to the plus side. Steering Adjustable Rate Control is a simultaneous setting for L
and R.
1) Select ST with the Select button and set CURVE TYPE of ST to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and adjust the setting value.
○
Setting Range: -100
～
100%
○
Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setting value.
○
Setting Range: 1
～
99%
○
Default: 50%
*When cancelling a selected feature, use the Back button.
Steering Operation Position
●
You can change the throttle feature from Mild to Linear and to Quick.
In general, when operating on a slippery road or if you find over powering,
change the setting to the minus side and when operating on a high-grip road or if you find lack of power in
the power unit, change to the plus side. You can set the High side and the brake side separately.
*Selection of the High side and the brake side is done by trigger operation.
1) Select TH with the Select button and set CURVE TYPE of TH to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and adjust the setting value.
○
Setting Range: -100
～
100%
○
Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setting value.
○
Setting Range: 1
～
99%
○
Default: 50%
*When cancelling a selected feature, use the Back button.
Select H/B by trigger operation
Point Steering Position
CURVE
SETTING
STEERING ADJUSTABLE RATE CONTROL
[ST]
THROTTLE ADJUSTABLE RATE CONTROL
[TH]
Summary of Contents for MT-5
Page 1: ......
Page 78: ...1 9 30 2021 670A14982A ...
