Sanwa LCR700, Instruction Manual, Page: 21 / 24

Resistance: Rp, Rs
Range Resolution DCR 100/120 Hz 1 kHz 10 kHz 100 kHz
20 Ω
0.01 Ω - 0.7 % + 8 d - - -
0.001 Ω - - 0.7 % + 8 d 0.7 % + 8 d 0.7 % + 8 d
200 Ω 0.01 Ω 0.3 % + 3 d 0.3 % + 3 d 0.8 % + 3 d 0.3 % + 3 d 0.3 % + 3 d
2 kΩ 0.0001 kΩ 0.3 % + 3 d 0.3 % + 3 d 0.3 % + 3 d 0.3 % + 3 d 0.3 % + 3 d
20 kΩ 0.001 kΩ 0.3 % + 3 d 0.3 % + 3 d 0.3 % + 3 d 0.3 % + 3 d 0.5 % + 5 d
200 kΩ 0.01 kΩ 0.5 % + 5 d 0.3 % + 3 d 0.3 % + 3 d 0.3 % + 3 d 0.9 % + 10 d
2 MΩ 0.0001 MΩ 0.5 % + 5 d 0.5 % + 5 d 0.5 % + 5 d 2.0 % + 10 d -
20 MΩ
0.001 MΩ 2.0 % + 8 d 2.0 % + 10 d 3.0 % + 20 d - -
0.01 MΩ - - - 5.0 % + 80 d -
200 MΩ 0.1 MΩ 5.0 % + 80 d 5.0 % + 80 d - - -
Capacitance: Cp, Cs (When D < 0.1)
Range Resolution 100/120 Hz 1 kHz 10 kHz 100 kHz
200 pF 0.01 pF - - 0.8 % + 10 d 2.0 % + 10 d
2000 pF
1 pF 0.5 % + 5 d - - -
0.1 pF - 0.5 % + 5 d 0.5 % + 5 d 0.7 % + 10 d
20 nF 0.001 nF 0.5 % + 5 d 0.3 % + 3 d 0.5 % + 5 d 0.3 % + 3 d
200 nF 0.01 nF 0.3 % + 3 d 0.5 % + 5 d 0.5 % + 5 d 0.7 % + 10 d
2000 nF 0.1 nF 0.3 % + 3 d 0.3 % + 3 d 0.5 % + 5 d 3.5 % + 10 d
20 μF 0.001 μF 0.3 % + 3 d 0.3 % + 3 d 1.0 % + 10 d -
200 μF
0.01 μF 0.3 % + 3 d 0.8 % + 10 d - -
0.1 μF - - 3.5 % + 10 d -
2000 μF
0.1 μF 2.0 % + 10 d - - -
1 μF - 1.5 % + 10 d - -
20 mF 0.01 mF 1.5 % + 10 d - - -
• Accuracy when D ≧ 0.1: Ae×
Ae means an accuracy of rdg in the main display.
― 38 ― ― 37 ―
Temperature
coefficient
[0.15 x (specified accuracy)]/ ℃
0 ～ 18 ℃ , 28 ～ 50 ℃
Operating
temperature/
humidity
0 ～ 50 ℃ < 80 % RH
Storage
temperature/
humidity
-20 ～ 60 ℃ < 80 % RH
Safety
standard
IEC61010-031
EMC
IEC61326-1
Under a condition field strength CS 3 V (0.15-80 MHz):
The following shows a total accuracy of the DC
resistance measurement.
Total accuracy = specified accuracy ± 150 dgt
In other ranges or a condition which is worse than
the above-described condition, the accuracy is not
specified.
Power source
Single alkaline 9 V battery 6LR61(IEC6LF22,
NEDA1604A) or an external AC/DC adopter
(separately available: AD-30-2)
Auto Power
Off
5 minutes after the last operation
Power
consumption Approx. 110 mW
Battery life Approx. 35 hours (Auto LCR Mode, 1 kHz)
Dimensions
without holster Approx. L 175 mm × W 80 mm × H 40 mm
with holster
Approx. L 184 mm × W 87 mm × H 45 mm
Mass
without holster Approx. 320 g
with holster
Approx. 400 g
Accessories
Clipping leads (CL-700),
Holster (H-701)
Shorting plate for the directly connectable measuring terminals
Instruction manual
Separately
available
accessories
AC/DC adopter (AD-30-2),
SMD clipping leads (CL-700SMD)
LCR USB communication unit (LCR-USB)
(PC communication sftware bundled)
8-2 Measuring Range and Accuracy
Accuracy: ±(% rdg + dgt) " % + d " is an abbreviation.
rdg: reading
dgt: least significant digit
Temperature: 23 ℃ ±5 ℃
Humidity: ≦ 80 % R.H.
( ≦ 60 % R.H. for the range of 2 MΩ, 20 MΩ, and 200 MΩ)
Accuracies after the OPEN/SHORT calibration are shown below.
" - ": the accuracy is not guaranteed.