― 36 ―
― 35 ―
information. An instrument sent to SANWA / agent / distributor
without above information will be returned to the customer.
Note:
1) Prior to requesting repair, please check the following:
Capacity of the built-in battery, polarity of installation and
discontinuity of the test leads.
2) Repair during the warranty period:
The failed meter will be repaired in accordance with the
conditions stipulated in 8-1 Warranty and Provision.
3) Repair after the warranty period has expired:
In some cases, repair and transportation cost may become
higher than the price of the product. Please contact SANWA
authorized agent / service provider in advance.
The minimum retention period of service functional parts is 6
years after the discontinuation of manufacture. This retention
period is the repair warranty period. Please note, however,
if such functional parts become unavailable for reasons of
discontinuation of manufacture, etc., the retention period may
become shorter accordingly.
4) Precautions when sending the product to be repaired:
To ensure the safety of the product during transportation, place
the product in a box that is larger than the product 5 times or
more in volume and fill cushion materials fully and then clearly
mark “Repair Product Enclosed” on the box surface. The cost
of sending and returning the product shall be borne by the
customer.
7-3 SANWA web site
http://www.sanwa-meter.co.jp
E-mail: [email protected]
[8] SPECIFICATIONS
8-1 General Specifications
LCD display
(with Backlight)
Main display 20,000 counts: Ls / Lp / Cs / Cp / Rs / Rp / DCR
Sub display 2,000 counts: D/Q/
θ
/ESR/RP
Over-range
indication
While the meter is reading outside limits, numeric
part of the display indicates
[OL]
.
Battery power
indication
4 levels
Measurable
parameters
Ls / Lp / Cs / Cp / Rs / Rp / DCR
（
including D/Q/θ/ESR/RP
）
Measuring
mode
Series / Parallel
Range
selection
Automatic
Measuring
terminals
4 terminals plus guard shielding
Accepts banana plugs.
Auto LCR
measurement
ranges
L: 20.000 μH
～
20.000 kH
C: 200.00 pF
～
20.00 mF
R: 20.000 Ω
～
200.0 MΩ
DCR
measurement
ranges
R: 200.00 Ω ~ 200.0 MΩ
Measuring
frequencies 100 Hz / 120 Hz / 1 kHz / 10 kHz / 100 kHz
Measurement
rate
1.2 times / second (LCR mode)
0.5 times / second (DCR mode)
Selectable
tolerances
±0.25 %, ±0.5 %,
±1 %, ±2 %, ±5 %, ±10 %, ±20 %,
-20 %
～
+80 %
Measuring
signal level 0.63 Vrms (nominal), 0.9 Vdc (nominal)
Operating
conditions
Altitude: < 2,000 m Pollution degree: II
Specification
guaranteed
temperature/
humidity
18
～
28
℃
< 80 % RH