Sanwa CD770, Instruction Manual

Page: 51 / 56

— 20 —
[8] SPECIFICATIONS
8-1 General Specifications
- method
Average value method
4000 counts
Approx. 3 times/sec.
Auto and Manual (Some with Manual only or Auto only)
“OL” shown in numerical part. (600 V DC/AC excluded.)
“ - ” indicated only when negative input.
Battery ( ) mark lights or flickers at approx.
2.4 V or below.
Altitude 2000 m or below, pollution degree II.
5 ˚C to 40 ˚C and humidity range as follows. No condensation allowed.
At 5 ˚C to 31 ˚C, 80 % RH (max). At 31 ˚C to 40 ˚C, linear drop from
80 % RH to 50 % RH.
-10 ˚C ~ 40 ˚C, 80
%RH max., no condensation
40 ˚C ~ 50 ˚C, 70 %RH max., no condensation
(When the meter will not be used for a long time, remove the batteries before storage.)
SUM-3 (R6), 2 pieces
About 400 hours continuously at DCV. (Auto
power off canceled)
Power off about 30 minutes after no operation.
0.5 A/250 V, Breaking capacity1.5 kA
166( ) x 82( ) x 44( ) mm (Projections not included)
Approx. 340 g (batteries included)
Typical 4.5 mW (at DCV)
Test lead (TL-21a), Instruction manual
Operation method
AC measuring method
LCD
Sampling rate
Range selection
Over-range indication
Polarity indication
automatic selection
Battery low warning
Environmental condition
Operating
temperature / humidity
Storage temperature /
humidity
Power supply
Battery life
Auto power off
Fuse
Dimensions
Mass
Power consumption
Standard
accessories included
Optional accessories
L W D
Alligator clip: CL-11, CL-15, TL-8IC
Clamp probe: CL-22AD, CL-33DC, CL-20D
High voltage probe: HV-60
Carrying case: C-77, C77H