background image

SANUVOX - MODEL GC S300-G2

 - 9  

3-YEAR WARRANTY

 — Except for the UV Lamp and Ballast, this 

Sanuvox Technologies Inc. product is warrantied to be free from defects 
in material and workmanship under normal use and maintenance for 
a period of three years from the date of original installation. A new 
or remanufactured part to replace the defective part will be provided 
without charge for the part itself, through a qualified servicing Sanuvox 
Technologies Inc. dealer or distributor, PROVIDED the defective part is 
returned to our distributor. The replacement part assumes the unused 
portion of the warranty. 

COMMERCIAL LAMP WARRANTY

 — The Sanuvox Technologies Inc. 

Ultra-Violet Lamps are warrantied to be free from defects and operate 
for 2 years after installation, under normal use and maintenance in a 
commercial application. A new lamp to replace the defective lamp will be 
provided without charge for the part itself, through a qualified servicing 
Sanuvox Technologies Inc. dealer or distributor, PROVIDED the defective 
part is returned to our distributor. The replacement part assumes the 
unused portion of the warranty. 

3-YEAR BALLAST WARRANTY

 — The Sanuvox Technologies Inc. 

Electronic Ballast is warrantied to be free from defects and operate for 
three (3) years after installation, under normal use and maintenance 
in a residential or commercial application. A new ballast to replace 
the defective ballast will be provided without charge for the part itself, 
through a qualified servicing Sanuvox Technologies Inc. dealer or 
distributor, PROVIDED the defective part is returned to our distributor. 
The replacement part assumes the unused portion of the warranty. 

THIS WARRANTY DOES NOT INCLUDE ANY ADDITIONAL LABOR 

ALLOWANCE OR OTHER COSTS

 incurred for diagnosis, repairing, 

removing, installing, shipping, servicing, or handling of either defective 
parts of replacement parts. SUCH COSTS MAY BE COVERED BY a 
separate warranty provided by the installer. 

LIMITATIONS OF WARRANTIES

 — ALL IMPLIED WARRANTIES 

(INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY) ARE 
HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH THE 
LIMITED WARRANTY IS GIVEN. THE EXPRESSED WARRANTIES MADE 
IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, 
ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER 
PERSON WHATSOEVER. 

SANUVOX WILL NOT BE RESPONSIBLE FOR:

 

1. Normal maintenance as outlined in the installation and servicing 

instruction or owner's manual. 

2. Damage or repairs required as a consequence or faulty installation or 

application by others. 

3. Failure to start due to voltage condition, blown fuses, open circuit 

breakers or other damages due to the inadequacy or interruption or 
electrical service. 

4. Damage or repairs needed as a consequence of any misapplication, 

abuse, improper servicing, unauthorized alteration, or improper 
operations. 

5. Damage as a result of floods, winds, fires, lightning, accidents, 

corrosive atmosphere, or other conditions beyond the control of 
Sanuvox Technologies Inc. 

6. Parts not supplied or designated by Sanuvox Technologies Inc. 

7. Sanuvox Technologies Inc. products installed outside the continental 

USA, Alaska, Hawaii, and Canada. 

8. ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR 

COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER. Some states 
do not allow the exclusion of incidental or consequential damages, so 
the above limitation may not apply to you. 

Model number:  _________________________________________

Date of installation:  ______________________________________

Name of owner:  ________________________________________

Unit serial number:  ______________________________________

Installed by:  ___________________________________________

Address of installation: ____________________________________

 

 

Sanuvox Technologies Inc.  

146, rue Barr, St-Laurent, QC H4T 1Y4 Canada  

T. 1-888-SANUVOX         F. 1-888-582-6475  

www.sanuvox.com          [email protected]

GC S300-G2  

LIMITED PARTS AND LAMP WARRANTY

Summary of Contents for GC S300-G2











Reviews: