SANUVOX - MODEL GC S300-G2
- 5
2.1 INSTALLING THE UNIT
TIPS FOR INSTALLER
It is recommended that the filtration unit
has a devoted outlet with 115V. It is not
recommended to connect unit with an
extension cord. If no outlet is available please
call an electrical contractor to have one
installed.
MAKE SURE TO INSTALL
FILTER ACCORDING TO AIR
FLOW DIRECTION FOR
MAXIMUM PERFORMANCE
Check for this symbol on each filter and it is
located on the units motor plate.
STEP 1:
Mount Hepa
STEP 2:
Finishing
Figure 2.1a -
Install unit using all supplied
fastening hardware.
Figure 2.2a -
Remove protective plastic covers
from all filters and install in proper location.
Figure 2.2b -
Replace door and insert power cord
into the receptacle of the HEPA and the other end
into a wall outlet.
INSTALLATION GUIDE
Stage 1: Pre-Filter
Stage 2: HEPA Filter
