6 -
SANUVOX - MODEL GC S300-G2
INSTALLATION GUIDE
2.2 UV LAMP INSTALLATION
STEP 1:
The UV Lamps are packaged in the filter section of the GC S300-G2. Remove the first UV lamp from the packaging material. The lamp is fragile, use extreme
care. Do not touch the glass on the lamp with bare hands. Use the enclosed gloves when handling the lamp. Handle lamp from the ceramic ends.
STEP 2:
Remove the screws holding the front plate of the GC S300-G2 to access the clamp assembly.
STEP 4:
Replace the front plate with the screws
removed in (2) above.
STEP 5:
Repeat the same process for the second lamp.
STEP 3:
Position lamp inside the aluminum enclosure. Route 4-pronged end of lamp through clamp. Clamp is tightened by moving lever perpendicular to the
clamp. Connect the female plug to the lamp. The plug fits in one direction only. If the plug will not connect to the lamp, turn the plug 90 degrees.
