background image

2

Does your TV weigh 

more

 than 50 lb (22.7 kg) including accessories?

No — Perfect!

Yes — This mount is NOT compatible. Visit accents.sanus.com or call 1-800-359-5520 to fi nd a compatible mount.

50 lb 

(22.7

 

kg)

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

3 mm 

 (1/8 in.)

11 mm 

 (7/16 in.)

Ready to begin?

Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV 
owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact 
Customer Service at 1-800-359-5520.

 

CAUTION: 

Avoid potential personal injuries and property damage! 

 

This product is designed for use in wood studs - DO NOT install into drywall alone

 

The wall must be capable of supporting fi ve times the weight of the TV and mount combined

 

Do not use this product for any purpose not explicitly specifi ed by manufacturer

 

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Do you have all of the tools needed?

Before getting started, let’s make sure this mount is perfect for you!

1

2

3

4

What is your wall made of?

Unsure?  Call 1-800-359-5520 

Perfect!

Drywall with 
wood studs

?

10 mm 

 (3/8 in.)

OPT

NOTE: 

Para instrucciones 

en Español, ver páginas 16-19.

Summary of Contents for AST16





















Reviews: