WARNING
: Do not clean your SANTEC product with ammonia (window cleaner), bleach, soaps, acids,
abrasives, harsh polishes, harsh cleaners, a coarse surfaced cloth, coarse sponge, or any type of scouring pad.
Doing so may ruin your faucet finish and/or void the warranty.
Thank you for making SANTEC a part of your lifestyle and luxury spa experience. Our products have been created as
works of enduring quality and sophisticated design. Luxurious finishes need proper care and attention, so in order to understand
how to properly clean your distinctive luxury finish, please refer to the finish care information below:
Your SANTEC product can be identified in one of two categories: clear coated finishes or non-clear coated finishes. Clear coated
finishes are more scratch-sensitive and are more reactant to harsh cleaning chemicals than non-clear coated finishes. Once you
have identified the specific luxury finish of your SANTEC product, please follow the important corresponding care instructions.
C L E A R C O AT E D F I N I S H E S
N O N - C L E A R C O AT E D F I N I S H E S
F I N I S H C A R E I N F O R M AT I O N
Please read ‘WHAT IS COVERED BY OUR WARRANTY’ and ‘EXCLUSIONS AND LIMITATIONS OF WARRANTY’ sections to
understand what is and what is not covered. Please have ready the proof of purchase (original sales receipt),
description
of
the
problem, and carefully package the product or defective part with postage prepaid. Then, please contact your local SANTEC
Showroom or write to SANTEC Technical Services.
T O O B TA I N WA R R A N T Y S E R V I C E
Effective: 05/01/2015
We recommend that all faucets, drains, etc., be gently wiped dry with a soft cloth after use to avoid water spotting
and water deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a non-abrasive
carnauba wax will add protection to the finish and should be used if the faucets will not be dried after use. Santec
Orobrass kitchen products are clear coated. For clear coated finishes, it is recommened to clean your product weekly
with a soft moist cloth.
We recommend that all faucets, drains, etc., be gently wiped dry with a soft cloth after use to avoid water spotting
and water deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a non-abrasive
carnauba wax is occasionally required and will add protection to the finish if the faucets will not be dried after use.
Clear Coated Finishes are as Follows:
Living finishes are unique, are intended to change over time and are exluded from the finish warranty. Any product
outdoors or in a marine environment are excluded from the finish warranty.
