- 12 -
2.3
Management methods
There are three management methods to manage EliteRAID and TowerRAID iSCSI Series, describe in the
following:
2.3.1
Web GUI
EliteRAID and TowerRAID iSCSI Series support graphic user interface to manage the system. Make sure
the LAN cable is connected. The default setting of management port IP is DHCP. The IP address could be
located by using the included RAID Finder Software.
Type the management port IP in the web browser.
Click any function at the first time; it will pop up a dialog to authenticate current user.
Login name: admin
Default password: 0000
Or login with read-only account which only allows reading the configuration and cannot change setting.
Login name: user
Default password: 1234
2.3.2
Console serial port
Use NULL modem cable to connect console port.
The console setting is baud rate: 115200, 8 bits, 1 stop bit, and no parity.
Terminal type: vt100
Login name: admin
Default password: 0000
2.3.3
Remote control – secure shell
SSH (secure shell) is required for controllers to remote login. The SSH client software is available at the
following web site:
SSHWinClient WWW: http://www.ssh.com/
Putty WWW: http://www.chiark.greenend.org.uk/
Host name: 192.168.1.1 (Default IP address: 192.168.1.1.)
Login name: admin
Default password: 0000
Tips
EliteRAID and TowerRAID iSCSI
only support SSH for remote control. For using SSH, the
IP address and password are required for login.
