Sanremo Milano LX SAP, Instruction Booklet

Page: 46 / 94

46
ENGLISH
* Press the button K5GR1 to end TECHNICAL PROGRAMMING. The display shows:
Select Drink
XXXXX
CAUTION: having entered the TECHNICAL PROGRAMMING environment, to exit it is necessary
to scroll all the menus using the button K5GR1; automatic exit from the “Technical Programming”
phase is not envisaged.
B) Reading of dispensed drinks (consumption)
* Press the button K5GR1 (for approx. 30”) unti l the display shows:
Cumulative Total
XXXXX
This represents the total of drinks that have been dispensed except for the hot water (tea).
* Press the buttons K1GR1(+) or K1GR2(-) to display the consumption reading in sequence.
Espresso
Group 1: XXXX
At the end of reading the consumption of coffee, the reading of the hot water consumption (tea) is
displayed.
Tea Water
XXXX
* Press the button K1GR1 to display the consumption in litres.
Liters
XXXX
* Exit at any time from the program by pressing the button K5GR1.
C) Resetting the counter readings
* Setting the consumption reading to zero
Press the button K5GR1 (for at least 20”) until
the display shows:
Cumulative Total
XXXXX
To reset the values, keep the buttons K3GR1 and K4GR1 pressed simultaneously until the display
shows:
Please Wait
Counters Reset
All the single counters will automatically be reset.
To exit from the program at any time, press the button K5GR1.
* Setting the litre consumption reading to zero. When the display shows:
Select Drink
Change H2Ofilter
the coffee machine water filter needs regenerating.
To reset the litre consumption reading, switch on the machine pressing the buttons K3GR1 and
K4GR1 simultaneously.
The display shows:
Reset H2O filter
Counter … Wait
After a few seconds the display shows:
Select Drink
Xxxxx
This means that the litre counter has been reset.