SANKI P212-F, Instruction Manual, Page: 33 / 40

31/36
2) Parameter list
Each time the Vol ▲ key is pressed, the parameter display switches in the descending order of the
following table. Each time the Vol ▼ key is pressed, the parameter display switches in the ascending order.
No.
Function Description Setting range
Default value
operation pattern
1 2 3 4
ｎ Ａ
0A ON delay timer in2 Input ON delay timer
0.0-9.9
0.0 〇 〇 〇
0b
OFF delay timer in2 Input OFF delay timer 0.0-9.9 0.0 〇 〇 〇
0C
Soft start Output soft start timer 0.2-9.9
--: Invalid
-- 〇 〇 〇
0d
Soft stop Output soft stop timer 0.2-9.9
--: Invalid
-- 〇 〇 〇
0E Start delay timer Output start delay timer
0.0-9.9
0.0 〇 〇 〇
0F
Stop delay timer OUT4 Output stop delay
timer
0.0-9.9
0.0 〇 〇 〇
0n
Parts shortage
timer
in2 Input parts shortage
detection
0-99
10 〇 〇 〇
0L
Remote Unit
setting
oF: The remote unit is invalid.
on: The remote unit is valid.
oF/on oF
〇 〇 －
0o
Frequency
tracking cycle
Setting of frequency
changing cycle
0.1-9.5 1.0
〇 〇 〇
0P
PI control gain
Setting of the speed of
output response to vibration
change when the
constant-amplitude control
is in process
1 (slow)
⇔ 9 (fast)
1-9 9 〇 〇 〇
0q
Vibration sensor
setting
Use of vibration sensor in the
constant amplitude control
Valid/Invalid
oF/on on
〇 〇 －
0r Search setting
Use of vibration sensor in
automatic tuning of frequency
Valid/Invalid
oF/on oF
〇 〇 －
05
Adjusting
frequency range
Setting of the search range
when the automatic frequency
tuning is in process
L:50-180Hz
C:160-280Hz
H:260-400Hz
AL:50-400Hz
L 〇 〇 －
06
in1 setting in1 Input logic
hi: Operation with
the contact
“Close”
Lo: Operation
with the contact
“Open”
Lo
〇 〇 －
07 in2 setting in2 Input logic
hi
〇 〇 －
08 OUT2 setting
Setting of OUT2 Output
function
AL/Er AL 〇 〇 －
Display pattern No. Backup display pattern No.
PAt1 PAt2 PAt3 PAt4
〇 －
% display Output voltage backup display
0.0 0.0 0.0 0.0
〇 －
Hz display Frequency backup display
240.0 240.0 240.0 240.0
〇 －
Version information Program version
V2xx
〇 －
io mode No. display io01: With overflow stop
io02: Without overflow stop
io03: 4 patterns [in2:Lo fixed]
io04: 4 patterns [in2:hi fixed]
io01/io02
io03/io04
io01
〇 －
0u
Amplitude control
setting
0: Constant voltage
1: Constant-amplitude and
automatic frequency
tracking
2: Constant-amplitude
0-2 0 〇 〇 －
Change during operation: 〇 … Enabled, … Disabled
Display according to mode: 〇 … Enabled, －… Disabled
Display
according to
the operation
mode
Change
during
operation