17/36
8. Operation and Amplitude Adjustment Method
V2ｘｘ
io01
0.
0.
A
n
0.0
Func key
Freq
▲
key
Set key
※
Next, go to <
③
Parameter setting>.
Program version
(for 2 sec)
“
io
”
mode (for 5 sec).
Initial screen:
Output%
①
Power ON
②
Switching from the
operation mode to the
adjustment mode
The following are displayed in this order:
AUTO lamp goes out, and the mode
is switched to the adjustment mode.
①
Data display area
②
Frequency pilot lamp
③
Voltage% pilot lamp
④
Operation pilot lamp
⑤
Parameter pilot lamp
⑥
Operation mode pilot lamp
⑦
Constant amplitude control
pilot lamp
⑧
Frequency lock pilot lamp
⑨
Operation pattern setting
：
ON
：
Blinking
：
OFF
<Lamp status>
<Adjustment mode>
⇒
In this mode, the frequency and the output%
can be adjusted, and all parameters can be set
and changed.
(A) ON/OFF key
(B) Func key
(C) Set key
(D) Vol
▲
key
(E) Vol
▼
key
(F) Freq
▲
key
(G) Freq
▼
key
Operation panel
<Meaning of display contents>
“A”: Switching to the “A” mode
“n”: Switching to the “n” mode
“Srch”: Frequency search
“ “: Tuning
Putput% screen