24/36
20.
0A0.0
0o 1.0
0o 1.0
0o 3.0
0o 3.0
20.
⑥
-B Adjustment of the automatic frequency tracking time in the
feedback control
(only when 0u=1)
Press the Vol
▲
key 8 times.
Freq
▲
/
▼
keys
Set key
Set key
The operation described in this section
is performed to change the automatic
frequency tracking time interval.
Perform this operation if the reaction
speed of the feedback control is too fast
or too slow and, as a result, the parts
transfer is unstable.
Perform this operation when the feeder
is in operation.
Press the
Func key long
for 2 sec.
※
Press the
ON/OFF key
to light up the
RUN lamp.
ON/OFF key
Press the
Func key long
for 2 sec.
Adjust the parameter 0u value while
actually watching the parts behavior.
Perform this operation slowly to carefully
watch the parts behavior.
If no improvement is seen, change the
parameter value again for adjustment.
Output% screen
Output% screen
Blinking
Blinking
