25/36
20.
Ｌｏｃ
ｕＬｏｃ
20.0
0.900
1.100
SAVE
12.5
0.900
1.100
SAVE
11.3
11.
Freq
▲▼
keys
Set key
Press the
Set key long
for 2 sec.
The PAT lamp
and the SAVE
indication blink
2 times.
※
The vibration
quantity has
been saved.
Press the
Set key long
for 2 sec.
The PAT lamp
and the SAVE
indication blink
2 times.
Press the Func
key 3 times.
The saved vibration quantity is assumed
as the reference (1.0 times).
The speed is adjusted by directly change
the vibration quantity.
The voltage% is that as of saving, and is
not in proportion to the magnification.
This function is valid only when the setting
is made to the parameter No. 0u=1, 2.
⑥
-C Fine-adjustment of the vibration quantity
※
The decimal point
is displayed.
Vol
▼
key
※
Adjust the magnification while
confirming the operation condition.
Perform this operation slowly and
carefully.
※
If the Func key is pressed without
the SAVE operation, the changes
are not saved but cancelled.
※
This shows the status in which
the voltage% becomes 12.5% when
the vibration quantity is changed by
0.900 times as an example.
However, even if the vibration
quantity is decreased, the voltage%
does not always lower.
So is the case when the vibration
quantity is increased.
※
Adjust the magnification while
confirming the operation condition.
※
Be sure to perform the SAVE
operation when the feeder is in
operation.
※
If there is no key operation for
2 min, the Loc status is resumed.
Blinking
Blinking
Vol
▲
key
Vol
▼
key
Vol
▲
key