17
• When storing the device, make sure that no heavy objects are
placed on top of it. Remove the batteries. The cuff tube should
not have any sharp kinks.
8. Error messages / troubleshooting
In case of faults, the
message appears in the display.
Error messages can occur when
1. inflation pressure is higher than 300 mmHg,
2. blood pressure is unusually high or low,
3. you move or talk during the measurement (in addition to
,
the cardiac arrhythmia icon
appears in the display),
4. the cuff tube is not inserted properly,
5. the cuff is inflated for longer than 16 seconds.
In the above cases, you must repeat the measurement. Make sure
that the cuff tube is properly inserted and that you do not move or
talk. Re-insert the batteries if necessary, or else replace them.
9. Specifications
Model No.
SBM 15
Method of Measure-
ment
Oscillometric, non-invasive blood pres-
sure measurement on the upper arm
Range of Measure-
ment
Pressure 0 – 300 mmHg,
systolic 40 – 280 mmHg,
diastolic 40 – 280 mmHg,
pulse 40 –199 beats/minute
Accuracy of the
pressure reading
systolic ± 3 mmHg /
diastolic ± 3 mmHg /
pulse ± 5 % of the displayed value
Measuring uncertainty
max. permissible standard deviation
according to clinical testing:
systolic: 8 mmHg /diastolic: 8 mmHg
Sets of Memory
2 x 60 memory places
Unit Dimension
L147 x W104 x H66 mm
Unit Weight
Approx. 310 g
Cuff Size
cuff for upper arm circumference of
23 – 35 cm
Operating Temperature + 10 °C to + 40 °C, ≤ 85 % RH
Storage- and
transport temperature
- 20 °C to + 70 °C, ≤ 85 % RH
Power Supply
4 x 1,5 V AA batteries (alkaline type LR6)
Battery Life
For approx. 250 measurements,
depending on blood pressure level or
inflation pressure
Accessories
With storage pouch, instruction manu -
al, 4 pcs “AA” battery
Classification
Application part Type BF
Protection class
internal power supply, IPXO, no AP or
APG, continuous operation
Key to symbols
Important! Read the operating
instruction!
Application part Type BF
These specification are subject to change without notice for pur-
pose of improvement.
Adapter
Model No.
FW7333SM/06
Input
100 – 240 V, 50 – 60 Hz
Output
6 V DC, 1150 mA, only in connection with
Sanitas blood pressure monitor
Supplier
Friwo Gerätebau GmbH
