10
ENGLISH
Problem
Cause
Solution
The vacuum cleaner
does not turn on.
1) The circuit breaker has tripped.
2) Plug is broken or has loose contact.
3) Branch circuit breaker has tripped.
1) Reset circuit breaker.
2) Replace cord.
3) Find circuit breaker box and reset.
The brush does
not rotate.
1) Broken brush belt.
2) Brush obstruction.
1) Replace belt.
2) Clear obstruction.
There is loss of
vacuum suction.
1) Vacuum inlet blocked.
2) Defective motor.
1) Visually inspect and clear blockage.
2) Replace motor.
Vacuum cleaner
does not pick up.
1) Strings / threads wrapped around brush.
2) Brush obstruction.
1) Remove strings / threads.
2) Clear obstruction.
Problem solving
How to maintain
Make sure machine is turned off and electrical power cord is unplugged.
After each use, carefully wrap power cord and place it on the cord hanger and check cord for wear or
damage. If cord is damaged, have the cord replaced by an authorized service center immediately.
1618809_6093WideTrack.qxp_Layout 1 8/15/19 7:32 PM Page 10
