Sanipex KOY, Installation Manual

Page: 6 / 16

ONE OUTLET / 2 HANDLE — CONCEALED PART
Install the concealed part at a depth so that the
finished surface is between the Min/Max marking
above.
Apply the surrounding finishes, fit the faceplate onto the valve body, if necessary run a small bead of
silicone around the outer rim of the face plate.
Install the cold water supply from the right and
hot water supply from the left as shown per the
above (if possible pressure test.
Remove the protective cover caps before face plate installation
To fit handles please go to page 8 & 9