Sanipex KOY, Installation Manual

Page: 10 / 16

TEMPERATURE CONTROL HANDLE INSTALLATION & OPERATION — ALL MODELS
The Calibration ring is pre-installed and set at the 12 o’clock position at 38°C DO NOT REMOVE
Place the diverter handle in position. Tighten the grub screw from underneath until secure. Insert the
screw cover.
To test function, turn the handle clockwise, then
anti-clockwise, it should stop at the 12 o’clock
position, press the button to turn.
When turning the handle back clockwise, at the
point the button comes to the 12 o’clock position
a ‘click’ will sound and the button pop back up.