SANGFOR IAM v2.1 User Manual
222
[Max Bandwidth Per IP] is configured with a bandwidth value instead of a rate, and free from the
impact of other bandwidth settings; while [Guaranteed Uplink/Downlink Bandwidth] and [Max
Uplink/Downlink Bandwidth] are configured with a rate, which indicates that the actual
bandwidth varies from the total bandwidth settings for this channel.
[Advanced]: Check this option to open the [Advanced Option] page. If you check the advanced
option, the external IP address (node) will be taken as one member of the LAN users (nodes), that
is to say, the [Allocation Policy] and [Max Bandwidth Per IP] will also be applied to the external
IP address(es), which will lower down the performance of the IAM gateway if there are lots of
external nodes.
The configurations are as shown below (in red):
[Schedule]: Configures the time period during which this bandwidth channel (policy) will get
valid.
[Valid Line]: Configures the external line to which this bandwidth channel (policy) applies.
[Destination]: Configures the destination IP address to which this bandwidth channel (policy)
applies.
