SANGFOR IAM v2.1 User Manual
163
Under the [Logon Properties] dialog, click the <Add> button to enter the [Add a Script] dialog.
Click <Browse> to upload the
logon.exe
script file and enter [Script Parameters] the IP address (IP
address of the IAM gateway device), the port number (1773) and shared key (must be the same
with that configured on the IAM gateway device). Parameters are separated from each other by a
blank space.
Then click the <Apply> and the <OK> buttons; close all the [Group Policy Object Editor], etc.
Having completed configuring the logon script, you have to click [Start] > [Run] and type the
“
gpupdate
” and click the <OK> button to have the group policy configurations take effect.
Till then, the logon script program is added successfully. When the directory user logs in, this
logon script program will run.
7.2.2.1.4.
Configure Logoff Script Program
Follow the steps (same with that in [Configure Logon Scrip Program]. Please refer to the above
section) and enter the [Group Policy Object Editor] page; click [User Configuration] > [Windows
Settings] > [Scripts (Logon/Logoff)], and then double click the [Logoff] item, as shown below:
