GB
12
Playing audio files in Bluetooth mode
When you have successfully connected your speaker with the chosen
Bluetooth device you can start to play your music using the controls on
your connected Bluetooth device.
1. Once playing has started adjust the volume to the required setting
using the Volume control on your radio or on your enabled Bluetooth
device.
2. Use the controls on your device to play/pause and navigate tracks.
Alternatively, press and release the Play/Pause ( ), Fast-forward
button ( ) , Rewind button ( ) on the radio.
3. Press and hold the Fast-forward or Rewind button to move through
the current track. Release the button when the desired point is
reached.
Note:
That not all player applications or devices may respond to all of these
controls.
Speaker memory and reconnecting a device
If your Bluetooth device already paired with DDR-60BT previously, the
unit will memorize your Bluetooth device, but it does not support the
automatic reconnection, reconnect with this product following the steps
below.
DDR-60BT can memorize up to 8 sets of Bluetooth device, when the
memory exceed this amount, the earliest paired device will be over
written.
1. Press and release the Pair button to enter the Bluetooth device
memory. Then rotate the Tuning control to find the desired
memorized Bluetooth device and press the Select button to connect
to the required Bluetooth device.
2. Alternatively, repeatedly press and release the Pair button to have
access to the stored Bluetooth device and press the Select button to
connect to the required Bluetooth device.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3 seconds to
disconnect with your Bluetooth device. The Bluetooth indicator flashes
in blue indicating the radio is discoverable again for pairing.
Summary of Contents for DDR-60BT
Page 1: ...GB DDR 60BT Version 1...
