SBOX-5002 - User Guide, Rev. 1.0
// 38
1.
Prepare the mounting surface with four screws and if necessary anchors corresponding to the mounting surface
type if no screw holes are available.
2.
Align the screw holes on the wall mount brackets (Figure 14, pos. 1) with the holes on the chassis.
Figure 16: Aligning the holes of wall mount brackets and chassis
3.
Place the wall mount stand brackets on the chassis.
4.
Secure the wall mount brackets to the chassis by the supplied screws (Figure 14, pos. 2).
5.
Place the SBOX-5002 on the mounting surface and then secure it to the mounting surface by screwing the wall
mount kit to the mounting surface.
6.
Now the SBOX-5002 is firmly mounted on the mounting surface.