COMe-mEL10 - User Guide Rev. 1.1
// 83
Sub-screen
Next Level Sub-screens / Description
PO: CT120BX500SSD1>
(continued)
Set User
Password>
Set HDD user password.
Advisable to power cycle system after setting Hard Disk Passwords.
Discard or save changes option in setup does not have any impact on
HDD when password is set or removed. If the ‘Set HDD User
Password’ option is hidden, power cycle to enable the option. again.
Secure Boot>
Secure Boot>
Enable to activate. Platform key (PK) is enrolled and the system is in
user mode. Mode change requires platform reset.
[Enabled, Disabled]
Secure Boot
Mode>
Custom: secure boot policy variable can be configured by a
physically present user without full authentication.
[Standard, Custom]
Restore Factor
Keys>
Install factor defaults [Yes, No]
Reset to Set Up Mode>
Key
Management>
Factory Key Provision>
Restore factory default after platform
rest and while system is in setup mode
[Enabled, Disabled]
Restore Factor Keys>
Restore factor defaults [Yes, No]
Reset to Set Up Mode>
Export Secure Boot Variables>
Enroll Efi Image>
Allows image to run in secure boot
mode. Enroll SHA256 Hash certificate
of a PE image into authorized signature
Database (db). Select a file system
from the available options.
Device Guard Ready
Remove UEFI CA from DB>
Restore DB Defaults>
Restore DB variable to factor defaults
[Yes, No]
Secure Boot Variable / Size / Keys / Key source
Platform Key>
Enroll factory defaults or load
certificate from a file:
1.
Public key certificate:
a.
EFI_Signature_List
b.
EFI_cert_X509 (DER)
c.
EFI_CERT_RSA2048 (bin)
d.
EFI_CERT_SHAXXX
2.
Authenticated UEFI variable
3.
EFI PE/COFF Image(SHA256)
Key Source: Factory, External, Mixed
Key Exchange Keys>
Authentication Signature>
Forbidden Signatures>
Authorize Timestamps>
OSRecovery Signatures >
