COMe-mEL10 - User Guide Rev. 1.1
// 76
Sub-screen
Next Level Sub-screens / Description
PCH-IO
Configuration>
SATA
Configuration>
(continued)
Aggressive LPM
Support>
Enable PCH to aggressively enter link power state
[Enabled, Disabled]
Serial ATA>
Read only field
CT120BX500SSD1 (120.0 GB)
Software Preserve>
Read only Field
SUPPORTED
Port [#]>
Enable or disable the SATA port [0 or 1]
[Enabled, Disabled]
Hot Plug>
Designates port as hot pluggable
[Enabled, Disabled]
Configure as eSATA>
Read only Field
Hot Plug Supported
External>
Marks port as External
[Enabled, Disabled]
SPIN Up Device>
Enable staggered spin up performed only on drives
with option enabled spin up at boot. Otherwise all
drives spin up at boot
[Enabled, Disabled]
SATA Device Type>
Identified the drive type
[Hard Disk Drive, Solid State drive]
Topology>
Identify the SATA topology
[Unknown, SATA, Direct Connect, Flex, M2]
SATA Port 0 DevSLP>
For DevSLP both hard drive and SATA port need to
support DevSLP function otherwise, unexpected
behavior might happen. Check module design before
enabling.
[Enabled, Disabled]
SATA Port 0
RXPolarity>
Disable is default- check module design before
enabling.
[Enabled, Disabled]
DITO Configuration>
[Enabled, Disabled]
DITO Value>
Read Only port
[625]
DM value>
Read Only port
[15]
Sub-screen
Next Level Sub-screens / Description
PCH-IO
Configuration>
USB
Configuration>
XHCI Compliance
Mode>
Disabled is default
Change to enable for Compliance mode testing
[Enabled, Disabled]
XDCI Support>
Read only field
[Enabled, Disabled]
USB2 PHY Sus Well
Power Gating>
Enable Sus well PG for USB2 PHT. Has no effect on
PCH-H. [Enabled, Disabled]
