COMe-mEL10 - User Guide Rev. 1.1
// 65
Sub-screen
Next Level Sub-screens / Description
Trusted
Computing>
(continued)
Storage
Hierarchy>
[Enabled, Disabled]
Endorsement
Hierarchy>
[Enabled, Disabled]
TPM 2.0 UEFI Spec
Version>
TCG_1_2: compatible mode for WIN8/WIN10
TCG_2: support for TCG2 protocol and event format for win 10 or later
[TCG_1_2, TCG_2]
Physical presence
Spec Version>
OS supports PPI Spec 1.2 or 1.3. Note: Some HCL tests might not support
1.3. [1.2, 1.3]
TPM 2.0 Interface
Type>
Read only field [CRB]
Device Select>
Supports TPM 1.2 only, TPM 2.0 Only or both with auto where TPM 2.0 is
default and then TPM 1.2 if default not found.
[TPM 1.2, TPM 2.0, Auto]
Sub-screen
Next Level Sub-screens / Description
ACPI Settings>
Enable ACPI Auto
Configuration>
[Enabled, Disabled]
Enable
Hibernation>
System ability to hibernate (OS/S4 sleep state)
Note: This option may not be effective with some operating systems.
[Enabled, Disabled]
ACPI Sleep State>
Selects the highest ACPI sleep state the system will enter when
suspend is pressed.
[Suspend Disabled, S3 (suspend to Ram)]
Sub-screen
Next Level Sub-screens / Description
Miscellaneous>
Generic eSPI
Decode Ranges>
Generic LPC via
eSPI Decode 1>
[Enabled, Disabled]
Watchdog>
Auto–Reload>
Automatic reload of watchdog timers on timeout
[Enabled, Disabled]
Global Lock>
Enable: watchdog registers (except WD-Kick) read
only until board is reset-
[Enabled, Disabled]
Stage 1 Mode>
Selects action for this stage
[Disabled, reset, Delay, WDT Signal only]
Rest Button
Behavior>
Selects reset button behavior
[Chipset Reset, Power Cycle]
I2C Speed>
Speed in KHz (Min. 1 KHz and max. 400KHz. 200KHz is an appropriate
default value.
[200]
Onboard I2C
Mode>
Selects Multi master or Busclear
[Multimaster, Busclear]
Manufacture
Mode>
Read only field
[Enabled, Disabled]
Lid Switch Mode>
Shows or hides LID switch in ACPI OS.
[Enabled, Disabled]
Sleep Button
Mode>
Shows or hides sleep button in ACPI OS
[Enabled, Disabled]
