1
Installation Instructions
MD6-ES24VK
1. WARNINGS
READ AND SAVE THESE INSTRUCTIONS.
FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE!
CAUTION:
(1) For General Ventilating Use Only. Do Not Use To Exhaust Hazardous Or Explosive Materials
And Vapors.
(2) The MD6-ES24VK is suitable for operation within indoor environments only.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY, OBSERVE THE
FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the manufacturer.
2.
Before servicing or cleaning unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as
a tag, to the service panel.
3.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
4.
Sufficient air is needed for proper combustion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those published by the National Fire
Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden
utilities.
6. Ducted fans must always be vented to the outdoors.
2. PRE-INSTALLATION INSPECTION
The MD6-ES24VK has been manufactured in accordance with rigorous standards of production. All the
components have been checked and tested at the end of the manufacturing process. We recommend
that you check the following after receiving this product:
1. The correct size has been received.
2. The correct model has been received.
3. The details on the rating label correspond to the electrical supply: voltage, frequency etc.
Remove the unit from packaging and inspect for shipping damage within 15 days of receipt. If the
product is found to be damaged, immediately contact your local authorized supplier.
DO NOT OPERATE
THE UNIT IF DAMAGED.
These instructions should be considered as a supplement to EPA standard
practices, as well as all state and local building code regulations.
Before installing the product check the following points:
1. The damper blade opens and closes freely.
2.
There are no obstructions to the airflow.
3. ENVIRONMENT
The MD6-ES24VK IS suitable for operation within indoor environments only. The MD6-ES24VK is
suitable for the supply of both conditioned and un-conditioned airstreams within the temperature ranges
(inclusive of duct airstream’s temperature) of -40°C up to +60°C.
