background image

7

11.    WARRANTY

S&P USA - S&P Canada warrant that the MD6-ES24VK will be free from defective 

materials and workmanship for the period of (5) years from the date of original purchase. In 

the event that we find any part is defective the product will be repaired or, in the Company’s 

discretion, replaced without charge provided that the product has been installed in 

accordance with the enclosed instructions and all applicable EPA Standards and state and 

local building codes.

IF CLAIMING UNDER WARRANTY: Please return the complete product, freight paid, to your local 

authorized distributor. All returns must be accompanied by a valid Bill Of Sale. All returns must be 

clearly  marked  “Warranty  Claim,”  with  an  accompanying  description  stating  the  nature  of  the  fault. 

THE FOLLOWING WARRANTIES DO NO APPLY: Damages from shipping, either concealed or 

visible.  Claim  must  be  filed  with  the  carrier.  Damages  resulting  from  improper  wiring  or  installation 

Damages caused by acts of nature, or resulting from improper consumer procedures such as: Improper 

Maintenance; Misuse; Negligence; Alteration; Abuse; Abnormal Use; or Accident or Incorrect Electrical 

Voltage and Current. Removal or alteration to the S&P USA - S&P Canada data plate label.

WARRANTY VALIDATION: The end user must keep a copy of the Bill of Sale to verify purchase date.

THE ABOVE (5) YEAR WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, 

EXPRESSED, WRITTEN OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR USE. IN NO EVENT SHALL Soler & Palau USA - Soler & Palau CANADA 

BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING 

LOSS OF PROPERTY, REVENUES, LOST PROFITS, COSTS OF REMOVAL, INSTALLATION OR 

REINSTALLATION.

 

Summary of Contents for MD6-ES24VK













Reviews: