Additionally, the utility is necessary if you plan to change the enclosure’s
default RAID configuration (RAID 5) or if you will swap out any of
the pre-installed hard drives. The G-RAID Software Utility installation
package is available on the SanDisk Professional website and can be
easily downloaded.
Follow the instructions below to easily install the G-RAID Software Utility:
1. Visit the following page to download the G-RAID Software Utility based
on your G-RAID device and operating system:
•
•
•
2. Mount the virtual drive containing the installation software package.*
*The version number of the .dmg file and .pkg file will change as it is
updated.
3. Double-click on the software package to begin the installation.
The introduction window explains that software will be installed on
your computer. You can review the software license agreement. Once
ready, click the
Continue
button to proceed.
4. The software license agreement will appear. Read the statement and
click
Continue
to proceed.
5. Click
Agree
if you agree to the terms of the license. To read the license,
click
Read License
. Choose
Disagree
if you do not agree with the terms.
This will terminate the installation procedure.
6. Click
Install
to begin the installation process.
7. The G-RAID Shuttle Software Utility will install in a few moments.
Once complete, a message will inform you that the installation was
successful. Click Close to complete the installation procedure.
The G-RAID Software Utility is now available to help manage your G-
RAID Shuttle. Use this tool if you need to modify the array configuration,
retrieve system information or update the enclosure firmware. The utility
tool is also useful for monitoring the storage system status as well
as troubleshooting. For more information on using the G-RAID Shuttle,
including instructions on how to use the Wizard menu or configure a
different RAID array configuration, see
Managing the Disk Array
chapter.
Setup
G-RAID Shuttle 4/8/SSD
User Manual
4
