2 S&C Instruction Sheet 461-504
Qualified Persons
WARNING
The equipment covered by this publication must be installed, operated, and
maintained by qualified persons who are knowledgeable in the installation,
operation, and maintenance of primary distribution fusing equipment along with
associated hazards. A qualified person is one who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualified person will be exposed
• The proper use of the special precautionary techniques, personal protective
equipment, insulating and shielding materials, and insulated tools for working on
or near exposed energized parts of electrical equipment
These instructions are intended only for such qualified persons. They are not
intended to be a substitute for adequate training and experience in safety
procedures for this type of equipment.
Read this
Instruction Sheet
NOTICE
Thoroughly and carefully read this instruction sheet and all materials included
in the product’s instruction handbook before installing or operating your
TripSaver II Cutout-Mounted Recloser. Familiarize yourself with the Safety Information
and Safety Precautions on pages 4 and 5. The latest version of this publication is
available online in PDF format at
sandc.com/en/support/product-literature/.
Retain this
Instruction Sheet
This instruction sheet is a permanent part of your TripSaver II Cutout-Mounted Recloser.
Designate a location where you can easily retrieve and refer to this publication.
Proper Application
WARNING
The equipment in this publication must be selected for a specific application. The
application must be within the ratings furnished for the selected equipment, and can
be found in S&C Specification Bulletin 461-33.
Introduction
