16 S&C Instruction Sheet 766-527LD
Wi-Fi Administration
Figure 14. The default
Interfaces
screen Serial and Wi-Fi ports.
Serial 1 (DB9 Port)
This is the RS-232/DB9 port for connection to the radio’s serial console port. If use of
RTS/CTS is required, set the
Flow Control
setpoint to “NONE.” See Figure 14.
Wi-Fi Port Numbers
Enter the IntelliLink UDP Port number and the Radio Console TCP Port number.
The
Wi-Fi Session Timeout
field determines the time after which the session will
automatically terminate activity through the connections. The
Mode
setting selects the
preferred Wi-Fi transmission standard (Default: N). The
Channel
setpoint can be set to
a channel with less traffic. The
Width
setpoint is the channel bandwidth in MHz. This
setting is only relevant when 802.11n is chosen for the
Mode
setting. If 802.11b or 802.11g
is elected it will be ignored.
