Sanako Lab 100, User Manual, Page: 41 / 172

Getting Started
•
35
To edit a remote directory , select a directory on the list and
click Edit . This opens a dialog where you can edit the same
information as when creating a new directory.
SELF-ACCESS SETUP
Self-access setup opens a window in which you can select
the MSU files that will be available for the self-access student
workstations.
Self-access workstations can be used for independent study
outside teacher control and they are defined in the Lab 100
Config application. For more information, see the chapter
Setting up self-access workstations in the Lab 100 Setup
section of this guide.
To select the MSU files available for self-access
workstations:
1. Tick the boxes next to the files to select them. Ticking a
folder will select all the files in the folder, but not in its
subfolders. When selected, a number appears next to the
files, according to which the students will be able to select
them for listening.
2. Click on the Send file list button. This makes the files
available to the self-access students and they can then
listen to the files by entering the file number on their UAP.