11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456
｜
Fax: 886-2-22694451
｜
37
www.etek.com.tw
©
U
n
ic
tr
on
T
ec
h
n
olo
gie
s C
or
p
.
A
ll
spe
cif
ic
at
io
n
s
su
bje
ct
to
c
h
an
g
e
w
ith
ou
t n
oti
ce
.
www.sanav.com
www.unictron.com
Set up FBR Command for Fiber Strap
FRB feature is for detecting the strap violation. The default setting of “FBR Tamper” detected time is 10 seconds
due to fiber characteristic.
When the feature is turned on, if the strap is cut, the alarm will be triggered and the device will send the ST
reports to indicate the strap violation. The ST state will be shown in the state field of report. The interval of ST
report depends on the setting. There may be a buzzing sound or vibration if the buzzer and vibrator are turned
on.
Once the alarm is triggered, it will not stop only if the “alarm off” command is being sent.
Regarding the “alarm off” command, please refer to the step 0 in the quick setting of SMS command.
There are two types of command, the short one is for toggling the function quickly and the long one is for setting
up all the parameter
Setup Format of short type
：
#<User Name>, <Password>, <Function Mode fbr>, <0/1 (On/OFF)>*
Example
：
#username,0000,fbr,0*
Setup Format of long type
：
#<User Name>, <Password>, <Function Mode fbr>, <0/1 (On/OFF)>, <Interval
15~65000>*
Example
：
#username,0000,fbr,1,60*
SMS Text
Description
#
Start sign.
username
Default ID of BRACELET.
If you have changed the Username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
fbr
Function code for fbr
0/1
Toggle the function:
0 means the device will not detect the strap violation
1 means the feature is enabled. (default)
60
This parameter is for setting up the interval of ST report. The value range is from
15 to 65000. “60” means 60 seconds. (default)
E.g. Once the fbr alarm is triggered , the device will send reports every 60
seconds until the “alarm off” command has been received.
*
End sign.
Table: FBR Setup Format Description
Situation
Message Reply
Setup Succeeds
[username] +, setup OK. Device Fiber detection is switched on/off.
Table: FBR Setup Response Description
