- -
S Y S T E M
S E T U P
- -
D A T U M : W G S - 8 4
U N I T S : n m / k t+
T I M E
D I F F
: + 0 0 : 0 0
T I M E
D I S P
: 2 4 H O U R
S I M U L A T O R
: o f f
SAMYUNG ENC
6.11 SYS SET-UP
Select SYS SETUP on MAIN MENU and press
.
1. HOW TO SETUP
Make the letter of item which is willing to set by
and press
.
2. DST-C CALC SETUP
1) DST-C CALC : Great Circle
* Great Circle Navigation - A segment of such a circle representing the shortest distance between two
terrestrial points
2) DST-C CALC : Rhumb Line
* Rhumb Line Navigation -The path of a ship that maintains a fixed compass direction, shown on a map
as a line crossing all meridians at the same angle.
3. DATUM
1) Set a standard coordinates which is made sea chart. The valid datum over the world is WGS-84.
2) The standard coordinates which is selectable are 171 in total and the coordinates which is using
frequently are WGS-84, WGS-72, KOREA/TOKYO, NORTH AMERI1927, EUROPEAN 1950, AUSTRALIAN
1984 and ADIADAN. Select ECT.SET and press
to set standard coordinate number from 001 to 171.
3) How to set ECT. SET
With 2) in above, press
at the status of ”ECT. SET". Show converted Datum number.
Refer to the table of “International Geodetic Datum” for data change.
Use (
) to change a numerical date for new datum and press
.
4. UNIT
It selects the display Unit and it displays display unit set in this clause of all display screen. The selectable
unit is of distance unit and speed unit, one can be selected among unit of nm/kt, km/kh and mm/mh.
* After selection with top and bottom direction switch, and press
.
5. TIME DIFF.
Time difference between world standard time and present ship's is input and it can be input from
13:30
13:30.
* The position of the letter (number) to be changed has to be flickering with right and left direction switch
and selection of number (letter) to be made with top and bottom switch, then press the switch, it would be
input.
6. TIME DISPLAY
Time display methods when showing time at all screens, it can select either 24 hour display method or 12
hour display method. In 12 hour display method, it displays "01:25P" (A stands for a.m while P stands for
p.m). In 24 hour display method. It displays "13:25".
"U13:25" stands for UTC time and "L13:25" stands for Local time.
* After selection made by top and bottom switch, press
then it is input.
7. SIMULATOR
It is used for learning how to operate. When this item is selected. GPS receiver is not used for position
information and it can be operated SIMULATOR information inside machine. When operator wants to stop
the activation, he should turn off the power and again either turn on the power or set up "off" in the
