Samyung SPR-1400, User Manual

Page: 31 / 47

- - C A L C U L A T I O N - -
M O D E : R O U T E ( R = 0 1 )
F R O M : 0 1 ( W = 0 0 1
T O : 2 ( W = 0 0 2
S P D : A U T O 1 2 . 6 k t
T T G : E T A :
R N G : 0 0 0 . 0 n m B R G : 0 0 2 '
- - R O U T E S S E L E C T - -
N A M E : R U T - 0 1 N o . 0 1
0 1 W P T - 0 0 1 + 0 0 1
0 2
0 3
0 4
E x i t [ M E N U ] S E T [ E N T ]
SAMYUNG ENC
6.6 CALCULATE
It has the function that the indication of calculation from WAYPOINT to WAYPOINT or from WAYPOINT of
ROUTES to WAYPOINT TTG,ETA,RNG,BRG or position of ship.
1. Calculate WAYPOINTS
1) MODE :
Selects "MODE" by and press . "WAYPOINTS" or "ROUTE" is shown.
Selects WAYPOINTS by .
<WAYPOINTS calculation>
2) FROM : It sets starting position, after it selects "FROM" by , press ,
Select "SHIP" or "WAYPOINTS" by .
3) TO : Ending position. After it selects "TO" by , press , it shows "WAYPOINTS LIST".
Select "WAYPOINTS" by .
4) SPD : Speed of ship in order to calculate TTG and ETA from starting point to ending point.
It sets and it is available to input AUTO or MANU
After it selects "SPD" by , press , it changes to AUTO, it inputs speed automatically. But it sets
AUTO, press , the current speed is selected.
After it flickers the position of figure by , it selects changeable figure by , press .
* It sets to the latest average speed under AUTO. latest average speed " means averaged speed from
AVR SPEED on GPS SETUP MENU.
5) If it inputs the MODE, FROM, TO, SPD, TTG, ETA, RNG, BRG is shown on GPS calculation.
2. Calculate time, distance, direction WAYPOINT which registered in ROUTE.
1) FROM : it sets ending position,
After it selects "FROM" by , press , ROUTES SELECTS is shown.
<ROUTES SELECT >
2) TO : It sets ending position.
After it sets "TO" by , press , ROUTES SELECT is shown.
After it selects WAYPOINTS that registered in ROUTE,push .
3) SPD : It need speed of ship in order to calculate TTG and ETA from starting point to ending point. It
sets and it is available to input AUTO or MANU
After it selects "SPD" by , press , it changes to AUTO, it inputs speed automatically. But it sets