SAMYUNG ENC
5.5 PLOTTER SCREEN DISPLAY & FUNCTION
① ② ③ ④ ⑤
⑦
⑧
⑥
⑨
1. Description on display
①
Receiver status(3D)
GPS receiver status : “ ”, “DR”, “2D”, “3D”, “DGPS", ”GPS ", "SIM".
* When it is working with simulator, “SIM" is flickering at this place.
②
Horizontal display range setting (320nm)
It represents distance of horizontal width on the plotting screen.
It can set up 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 40, 80, 160, 320nm by adjusting direction switch
like
◀
(distance to be narrow),
▶
(distance to be wide) without curse coming on the screen.
③
Boat's track(~)
It displays ship's track as a line (hereinafter called ship's track).
When it displays on the existing screen, it displays as muce details as possible, but when it calls the past
track or memorized ship's track, it shows according ti ship's track memory width(Width is set at Menu.)
④
Own ship mark (o blinking) : It displays ship's existing position as a dot.
⑤
Waypoint mark(x Shape selectable) : it displays destination as a registered mark.
⑥
) : It displays cursor as "+" which functioned ON/OFF at menu screen.
⑦
TRK: -> Track Point(TRK:220)
It displays total track points so far recorded.
BRG: -> Bearing to cursor or Bearing to Course(BRG: 130°)
It displays direction for destination from existing position. When it displays "RNG:+", it means cursor
position from the exsiting position.
⑧
Range to cursor or Range to Course(RNG:+ 8.4nm)
When "RNG:+8.4nm" comes on indicator, it means displayed distance for cursor point from the existing
position.
⑨
Cursor position(35° 05.221 N 129° 04.180E)
When it displays ) on the indicator, it displays cursor's position, but when it is without cursor it
displays boat position.
