Samyung ENC SI-30A, Manual Instruction

Page: 28 / 80

1 8
3-4-8 Use of cursor
If No.7 key is pressed, cursor will appear. Users can move chart and select other vessels using
cursor.
Chart is on the center of screen Chart is moved
User can move cursor using direction key. If the cursor is get out of screen, the place cursor
was located is moved to the center of screen. If cursor is moved to other vessel, information
of the selected is shown on the top of the screen.
If cursor is appeared on the screen, information of longitude, latitude, range and bearing is
shown on the bottom of the screen.
If No.7 key is pressed again, cursor function is cancelled. And chart is displayed with own
vessel as the center