Samyung ENC SI-30A, Manual Instruction

Page: 3 / 80

Instruction
* The following settings can be modified only the dealer.
1. How to set MMSI IMO & Name, Call sign
1-1 SETTING
MENU key→ 2.INIT SETUP → ENT → 2.SET STATIC DATA → ENT → Password → ENT
1-2 Choose setting with arrow keys and then input the data. (After input, press ENT key)
1-2-1 . MMSI : ENT → Input 9 numbers → ENT
1-2-2 . IMO No : Move to IMO No. with arrow keys → ENT → Input IMO ID → ENT
1-2-3 . Ship Name : Move to Ship Name with arrow keys → ENT → Input Name of vessel →
ENT
1-2-4 . C. SIGN : Move to C. SIGN with arrow keys → ENT → Input call sign → ENT
1-3 SAVE
1-3-1. After setting press F2(SAVE) → F1(YES : SAVE) / F2(NO : Not save)
1-3-2. F1 is to go back to the previous display without save.
* MMSI can be modified only in the case of "000000000" and After modifying it is impossible
to change. (All static information will be saved in AIS transponder.)
2. How to set a location of GPS ANT
2-1 SETTING
MENU key → 2.INIT SETUP → ENT → 5. SET GNSS ANTENNA POSITION → ENT → Password
→ ENT
2-2 Internal means the internal GPS function, External on the right hand side means a
location of GPS antenna.
2-3 How to input
Move to input section with arrow keys → ENT → Input numbers → ENT
2-4 SAVE
2-4-1. After setting press F2(SAVE) → F1(YES : SAVE) / F2(NO : Not save)
2-4-2. F1 is to go back to the previous display without save.