SAMWONTECH
1th Edition of TEMP1000_Series IM : Apr. 2014 Page 38 / 63
7.11 OUTPUT Group
This INPUT group is used for setting parameter D-Register for control output and retransmission.
█ Control output and retransmission setting D-Register
D-Reg.
Symbol
Descriptions
D1002
DIR
Select the direction of behavior.(0:REV, 1:FWD)
D1003
HCT
[HEAT]Sets the output cycle.
D1004
HATG
[HEAT]Auto-Tuning GAIN value for Manual PID.
D1005
HPO
[HEAT]Output is in an emergency setting.
D1006
CCT
[COOL]Sets the output cycle.
D1007
CATG
[COOL]Auto-Tuning GAIN value for Manual PID.
D1008
CPO
[COOL]Output is in an emergency setting.
D1009
ARW
ARW(Anti Reset Wind-up) sets the value of prevention.
D1011
UPOPR
Change the setting up of the control output.
D1012
DNOPR
Change the setting of control output is falling.
D1015
RETT
Target object of transmission (0:PV, 1:SP, 2:MV)
D1016
RETH
Range High of transmission
D1017
RETL
Range Low of transmission
D1031
OUT1.TYPE
Setting the ouput terminal of OUT 1.
D1032
OUT2.TYPE
Setting the ouput terminal of OUT 2.
D1033
OUT3.TYPE
Setting the ouput terminal of OUT 3.
D1034
OUT4.TYPE
Setting the ouput terminal of OUT 4.
D1037
OUT1.MODE
Setting the output type of OUT 1.(0:SSR, 1:SCR)
D1038
OUT2.MODE
Setting the output type of OUT 2.(0:SSR, 1:SCR)
D1039
OUT3.MODE
Setting the output type of OUT 3.(0:SSR, 1:SCR)
D1040
OUT4.MODE
Setting the output type of OUT 4.(0:SSR, 1:SCR)
