SAMWONTECH
1th Edition of TEMP1000_Series IM : Apr. 2014 Page 37 / 63
7.10 INPUT Group
This INPUT group is used for setting parameter D-Register for sensor and its bias.
█ INPUT setting D-Register
D-Reg.
Symbol
Descriptions
D0901
SENGP
Select the sensor group. (0:T/C, 1:RTD, 2:DCV)
D0902
SENTP
Setting the type of sensor.
D0903
UNIT
Setting the display unit.
D0904
DP
Set-point position.
D0905
TCSL
T/C select show (0:T/C, 1:T/C+RJC, 2:RJC)
D0906
SOPN.SEL
Sensors-open, pv select the direction. (0:UNSET, 1:UP, 2:DOWN)
D0907
INRH
Setting the High limit range of use.
D0908
INRL
Setting the Low limit range of use.
D0909
BIAS
Setting the previous range revision value.
D0910
INFL
Removes noise when measuring input includes noise of high
frequency.
D0912
INSH
Scale sets the High limit.
D0913
INSL
Scale sets the Low limit.
D0916
SPLMT.H
Setting the upper limit of SP LIMIT.
D0917
SPLMT.L
Setting the lower limit of SP LIMIT.
D0931~D0938
BP1.DDV~BP8.DDV
Setting revision temperature at each standard temperature.
D0939~D0946
BP1.DPV~BP8.DPV
Setting each standard temperature.
D0970~ D0971
UNITNAME_1~ UNITNAME_2
Setting the DCV sensor display unit name.
