SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 26 / 58
█
Bit Map status information D-Register
D-Reg.
Symbol
Descriptions
D0010
NOWSTS
Current operation status information.
D0011
IS.STS
INNER signal generating status information.
D0012
TS.STS
TIME signal generating status information.
D0013
ALM.STS
ALARM signal generating status information.
D0014
ONOFF.STS
ON/OFF signal generating status information.
D0015
DOCTR.STS
Other DO signal generating status information.
D0016
CTR.STS
Displayed DO signal status information on 2
nd
Oper screen
D0017
DO.STS1
D0018
DO.STS2
Actual generating Do signal status through I/O board
D0010
DI.DATA
DI Error outbreak status information.
D0020
ADERR.STS
Error status out of control range
█
Common process information D-Register for both PROG / FIX
D-Reg.
Symbol
Descriptions
D0001
TEMP.NPV
Current temperature PV
D0002
TEMP.NSP
Current temperature SP
D0003
WET.NPV
Current WET temperature PV
D0004
WET.NSP
Current WET temperature SP
D0005
HUMI.NPV
Current relative humidity PV
D0006
HUMI.NSP
Current humidity SP
D0007
TEMP.MVOUT
Current temperature percentage control output (MV)
D0008
HUMI.MVOUT
Current humidity percentage control output (MV)
D0009
C.PIDNO
Currently running PID number
D0024
RUN.TIME_H
Process time (Hour)
D0025
RUN.TIME_M
Process time (Minute)
D0026
RUN.TIME_S
Process time (Second)
█ PROGRAM operation process information D-Register
D-Reg.
Symbol
Descriptions
D0027
RUN.PTNO
Currently running program pattern number
D0028
RUN.SEGNO
Currently running program segment number
D0029
NOW.PT.RPT
Count of current Repeat operation at running pattern
D0030
TOTAL.PT.RPT
Total Programmed Count of Repeat op. at running pattern
D0031
NOW.SEG.RPT
Count of current Repeat operation at running segment
D0032
TOTAL.SEG.RPT
Total Programmed Count of Repeat op. at running segment
D0033
NOW.SEGTIME_H
Process time(High) of currently running segment
D0034
NOW.SEGTIME_L
Process time(Low) of currently running segment
D0035
TOTAL.SEGTIME_H
Programmed total time(High) of currently running segment
D0036
TOTAL.SEGTIME_L
Programmed total time(Low) of currently running SEG
D0039
PREV.TEMP.TSP
Temperature Target Set Point of the preceding segment
D0040
NOW.TEMP.TSP
Temperature Target Set Point of the current segment
D0041
PREV.HUMI.TSP
Humidity Target Set Point of the preceding segment
D0042
NOW.HUMI.TSP
Humidity Target Set Point of the current segment
D0050
USED PATTERN
Total number of programmed pattern
D0051
USED SEGMENT
Total number of programmed segment