SAMWONTECH
1st Edition of TEMI2000_Series IM : Dec. 15. 2008 Page 42 / 58
7.16 PROGRAM PATTERN Group and Setting
7.16.1 PROGRAM Group
PROGRAM group consists of parameter D-Register to arrange program PATTERN organized by each segment profile.
Each segment should be established step by step.
█ Program PATTERN setting D-Register
D-Reg.
Symbol
Range
Description
D1701
COM_PTNO
1~120
Program PATTERN number to Read or Write
0
To Read or Write in D1736~D1757
D1702
COM_SEGNO
1~99
Segment number to Read or Write
D1703
PTCOPY_START
-
First target (START) pattern number to paste
D1704
PTCOPY_END
-
Last target (END) pattern number to paste
D1705
PTDEL_START
-
First target (START) pattern number to delete
D1706
PTDEL_END
-
Last target (END) pattern number to delete
1
INIT : Initialize D1701~D1708 to '0'
2
READ : Read profiles in D1701 and D1702
3
WRITE : Write profiles in D1701 and D1702
4
PT COPY : Copy PTN in D1701 to PTN designated in D1703~1704
5
PT DEL : Delete PTN designated in D1705~D1706
6
PT NAME READ : Read PTN NAME in D1701
7
PT NAME WRITE : Write PTN NAME in D1701
D1707
TRIGGER
8
ALL PT : Write pattern profile at D1701 into D2100
0
FULL : Excessive number of pattern or segment setting
1
DONE : Normally accessed of D1707(TRIGGER) command
2
PT EMPTY : No profile in designated pattern
3
SEG EMPTY : No profile in designated segment
4
PT RUN : Program RUN state of designated PTN
D1708
ANSWER
5
PARA ERROR : Program setting Error of D1701~D1707
D1711~D1722
PATTERN_NAME1~12
-
Pattern NAME to Read or Write
D1725
TEMP.TSP
-
TEMP. Target Set Point(TSP) to Read or Write
D1726
HUMI.TSP
-
HUMI. Target Set Point(TSP) to Read or Write
D1727
SEG.TIME_H
-
Target Process time (HOUR) of segment to Read or Write
D1728
SEG.TIME_L
-
Target Process time (MIN & SEC) of segment to Read or Write
D1729
TS1
-
TS1 to Read or Write
D1730
TS2
-
TS2 to Read or Write
D1731
TS3
-
TS3 to Read or Write
D1732
TS4
-
TS4 to Read or Write
D1733
SEG.WAIT
-
WAIT to Read or Write
