Samwon Tech TEMI850 Instruction Manual Download Page 5

Page: 5 / 122

SAMWONTECH

4th Edition of TEMI880 IM : Jan. 29. 2007 Page 3 / 119

1.2 Package checklist

▶ Check the following when the controller opens from its package. Check the contents of the package

against the Package List to make sure that all accessories are included in the package.

1.2.1 Model and Option codes

▶ Check the controller for any apparent physical damage.
Check point : Model number which is located right side of controller and left side of box.

Model

Option Code

UDC

Description

Standard I/O BOARD (10 POINT) → Include 24V SMPS

Additional I/O BOARD (10 POINT)

RS232C (Standard)

RS485 (Option)

TEMI880

/UDC

UDC300 (Option)

☞ Standard is TEMI880-10 (Standard I/O Board + RS232C).

1.2.2 Components

▶ Check that the following items are provided.

TEMI880

Brackets

Instruction Manual

I/O1 BOARD + 30 Pin Cable

→ Include 24V SMPS

I/O2 BOARD + 14 Pin Cable

→ If model is TEMI880-20 or -21

Summary of Contents for TEMI850



























































































































Search results

Summary of Contents for TEMI850

Reviews:

Related manuals for TEMI850

Brands by name

Popular brands

Samwon Tech TEMI850, Instruction Manual

Search results

Summary of Contents for TEMI850

Reviews:

Related manuals for TEMI850

Brands by name

Popular brands