Input mode
( )
In case of output mode is S, T, D, input mode fixed to
Ud-A, B, C.
Max count
Speed
(
)
Maxcount speed base on the INA or INB input signal is1:1
Max count speed setting is applied same time at INA,INB.
In case output mode is
“
D
”
can select one from 1, 30, 1kcps.
outputmode
( )
in case of input mode is Up or Down
in case of input mode is Up/Down-A, B, C
OUT2 outtime
( )
Unit:ms
OUT1 outtime
( )
Unit :ms
Input logic
( )
Select input logic.
voltage :
non voltage :
min Reset time
( )
external RESET signal input min time interval(Unit : ms)
Decimal point
( )
Scale setting
( )
Scale setting range : 0.001 ~ 99.999
Scale values(K-Factor) : 1counter value of convert to real scale
Count memory
( )
: count power off reset
(If power off, count reset to 0 )
: count power off memory
(If power off ,count memory before power off)
Key lock
( )
Counter/Timer select )
: Counter
: Timer
* A
”
more than min signal width,
”
B
”
more 1/2 then min signal width
If the signal width is under that, the count can make error ±1 count.
* The meaning of
“
H
”
,
“
L
”
at count table
