Engl
ish
Installation
English
24
STEP 3
Adjust the leveling feet
1.
Gently slide the washer into position. Excessive force
may damage the leveling feet.
2.
Using a wrench, turn the leveling feet clockwise
or counterclockwise to adjust the height until the
washer is level.
3.
Using a flathead screwdriver, tighten the
locking
nuts (A)
.
NOTE
Use the open-end of the supplied wrench to adjust the
leveling feet.
STEP 4
Connect the water hose
B
A
CAUTION
• Make sure to use new water hoses and that
rubber
gaskets (B)
are inside the
couplings (A)
at both ends
of the hoses. Water hoses without the gaskets may
leak.
• Allow 5 in. (127 mm) of space between the back of
the washer and the wall to prevent water hoses from
being kinked. Kinked hoses may cause water leaks.
• If there is a water leak, stop using the washer and
contact a local Samsung service center. A water leak
may cause electric shock.
• Do not stretch the water hoses by force. If a hose is
too short, replace the hose with a longer hose.
Untitled-12 24
2021-11-04 6:44:17
