Installation
English
22
Installation
Step-by-step installation
STEP 1
Select a location
Location requirements:
•
A solid, level surface without carpeting or flooring that may obstruct ventilation
•
No direct sunlight
•
Adequate room for ventilation and wiring
•
Ambient temperature always higher than the freezing point (32 °F / 0 °C)
•
Away from heat sources
STEP 2
Connect the water hose
B
A
CAUTION
•
Make sure to use new water hoses and
that
rubber gaskets (B)
are inside the
couplings (A)
at both ends of the hoses.
Water hoses without the gaskets may
leak.
•
Allow 6 in. (150 mm) of space between
the back of the washer and the wall to
prevent water hoses from being kinked.
Kinked hoses may cause water leaks.
•
If there is a water leak, stop using the
washer and contact a local Samsung
service center. A water leak may cause
electric shock.
•
Do not stretch the water hoses by force.
If a hose is too short, replace the hose
with a longer hose.
Untitled-10 22
Untitled-10 22
2023-06-22 5:32:05
2023-06-22 5:32:05
